45 hours

This module introduces students to basic safety and hazard recognition within the workshop environment. It includes the identification and handling of hazardous materials, personal safety, the safe operation of equipment, safe forklift operation, fire prevention and First Aid.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

15 hours

This module introduces the student to the mechanics trade. It explains the expectations of employers, relations with other employees, government regulations, and an overview of apprenticeship. It includes one week of work experience within the industry.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

30 hours

This module introduces the student to locating parts and service information, record keeping, writing service reports, using trades specific computer software, and basic principles of drafting.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

48 hours

This module introduces the student to the various tools used in the mechanics trade. It covers hand, electric, air, hydraulic and measuring tools. The correct usage, care and maintenance of the tools will be emphasized.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

30 hours

This module introduces the student to safe lifting, rigging, jacking, blocking, and moving of loads. The types of equipment, procedures, and safety will be covered.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

30 hours

This module introduces students to the various hoses, fasteners, fittings and tubing used in the mechanics trade. It includes the correct identification and installation procedures.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

30 hours

This module introduces the student to basic shielded metal arc welding (SMAW), wire feed, arc air, and gas welding. It covers basic welding and cutting procedures for mild steel, temperature control, and the selection of welding rods and gases. Also, safety is a major emphasis of this module.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

29 hours

This module teaches the student how to safely start, move, stop, and shut down heavy equipment and heavy duty trucks. Also, the safe procedures for securing the machine or truck before servicing are emphasized.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

35 hours

This module introduces the student to winches and working attachments. Removal and replacement, as well as general servicing will be covered.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

90 hours

This module introduces the student to hydraulic brakes, air brakes, and specialty brakes. It covers fundamentals, systems operations, applications, components, servicing, and troubleshooting. Safe work practices are emphasized throughout the module.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

48 hours

This module introduces the student to basic mobile hydraulics. It covers fundamentals, basic operations, maintenance and trouble shooting. Good work habits and safety are emphasized in this module.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

10 hours

This module introduces the student to the basic theory of combustion pertaining to internal combustion engines.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

15 hours

This module introduces the student to the fuels and lubricants used with mobile equipment. Correct servicing procedures are stressed.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

65 hours

This module introduces the student to the various engine support systems. The cooling, lubrication and air induction systems will be studied. The operation, maintenance, and safety will be emphasized.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

35 hours

This module introduces the student to gasoline and alternate fuel systems for internal combustion engines. The operation, maintenance and safety of these systems are thoroughly examined.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

20 hours

This module introduces the student to diesel fuel systems. The different types of systems will be discussed, with emphasis on good maintenance practices.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

90 hours

This module introduces the student to mobile equipment electrical systems. Basic electricity, batteries, charging systems, cranking systems, and ignition systems are studied.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

45 hours

This module introduces the student to the design, operation, and servicing of drive axles and drivelines.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

45 hours

This module introduces the student to basic power transmission with emphasis on clutches and standard transmissions.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

35 hours

This module introduces the student to torque converters and powershift transmissions. The operation, testing and servicing will be studied.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

20 hours

This module introduces the student to bearings and seals. The proper handling, installation, removal, operation, maintenance of bearings and seals will be examined.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

90 hours

This module will introduce the student to track type equipment undercarriage, steering systems, and final drives. A thorough examination of these systems will be studied. Also, a large component of this module will be spent in the shop on practical exercises.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

120 hours

This module introduces the student to wheel machine steering, suspension, floatation, and final drive systems. Both trucks and heavy equipment systems will be covered.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

10 hours

This student will be trained and evaluated throughout the Heavy Duty/Commercial Transport Mechanics program on work habits that are required for success in the Heavy Duty/Commercial Transport Mechanics trade.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect 

20 hours

This module prepares the student for the final comprehensive exam for the entry Level Heavy Duty/Commercial Transport Mechanics program.

Prerequisite(s): Admission to the Heavy Duty/Commercial Transport Mechanics Program

Offered in the following terms: 2010 Fall

For more information, timetabling or to register visit: NIC Connect